Elevated temperature mechanical properties of Inconel 617 surface oxide using nanoindentation

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING

卷:788

Article

Salari, Sepehr¹  Rahman, Md Saifur²  Polycarpou, Andreas A.²  Beheshti, Ali¹ 

[1] George Mason Univ, Dept Mech Engn, Fairfax, VA 22030 USA

[2] Texas A&M Univ, J Mike Walker Dept Mech Engn 66, College Stn, TX 77843 USA

关键词: Nanoindentation;    Creep;    Elevated temperature;    Finite element analysis;    Inconel 617;   

DOI  :  10.1016/j.msea.2020.139539

来源: Elsevier

【 摘 要 】

Inconel 617 is a principal candidate material for helium gas cooled very-high-temperature reactors with outlet temperatures of 700-950 degrees C. Recent findings showed that this alloy develops unique surface oxide layers especially at high temperature (HT) helium environment with distinctive wear, friction and contact properties. This study investigates the elevated temperature mechanical properties of Inconel 617 top surface layers aged in HT helium environment. Nanoindentation technique is used to obtain load-displacement graphs of the alloy top surface oxide in temperatures ranging from 25 degrees C up to 600 degrees C. In addition, using finite element analysis along with an iterative regression technique, a semi-numerical method is developed to further measure and quantify the material parameters and, in particular, time-independent and creep characteristics of the oxide. While Young's modulus of the oxide is found to be relatively close to the bulk for the tested temperatures, the yield strength and hardness, in comparison to the bulk material, increase significantly as the material is oxidized after aging. The oxide exhibits significant softening as the temperature increases to 600 degrees C. Unlike the bulk material, diffusion through the grains is found to be the dominant creep mechanism for the oxide. Considerable difference between the mechanical properties of the oxide and the bulk material shows the need for accurate measurements of near surface mechanical properties, if reliable predictive contact and tribological models are sought at elevated temperatures.

【 授权许可】

Free