Self similarities in desalination dynamics and performance using capacitive deionization

WATER RESEARCH

卷:140

Article

Ramachandran, Ashwin¹  Hemmatifar, Ali²  Hawks, Steven A.³  Stadermann, Michael³  Santiago, Juan G.² 

[1] Stanford Univ, Dept Aeronaut & Astronaut, Stanford, CA 94305 USA

[2] Stanford Univ, Dept Mech Engn, Stanford, CA 94305 USA

[3] Lawrence Livermore Natl Lab, 7000 East Ave, Livermore, CA 94550 USA

关键词: Capacitive deionization;    Water desalination;    Reduced order model;    Self-similarity;    Porous carbon electrodes;    Performance optimization;   

DOI  :  10.1016/j.watres.2018.04.042

来源: Elsevier

【 摘 要 】

Charge transfer and mass transport are two underlying mechanisms which are coupled in desalination dynamics using capacitive deionization (CDI). We developed simple reduced-order models based on a mixed reactor volume principle which capture the coupled dynamics of CDI operation using closed-form semi-analytical and analytical solutions. We use the models to identify and explore self-similarities in the dynamics among flow rate, current, and voltage for CDI cell operation including both charging and discharging cycles. The similarity approach identifies the specific combination of cell (e.g. capacitance, resistance) and operational parameters (e.g. flow rate, current) which determine a unique effluent dynamic response. We here demonstrate self-similarity using a conventional flow between CDI (fbCDI) architecture, and we hypothesize that our similarity approach has potential application to a wide range of designs. We performed an experimental study of these dynamics and used well-controlled experiments of CDI cell operation to validate and explore limits of the model. For experiments, we used a CDI cell with five electrode pairs and a standard flow between (electrodes) architecture. Guided by the model, we performed a series of experiments that demonstrate natural response of the CDI system. We also identify cell parameters and operation conditions which lead to self-similar dynamics under a constant current forcing function and perform a series of experiments by varying flowrate, currents, and voltage thresholds to demonstrate self-similarity. Based on this study, we hypothesize that the average differential electric double layer (EDL) efficiency (a measure of ion adsorption rate to EDL charging rate) is mainly dependent on user-defined voltage thresholds, whereas flow efficiency (measure of how well desalinated water is recovered from inside the cell) depends on cell volumes flowed during charging, which is determined by flowrate, current and voltage thresholds. Results of experiments strongly support this hypothesis. Results show that cycle efficiency and salt removal for a given flowrate and current are maximum when average EDL and flow efficiencies are approximately equal. We further explored a range of CC operations with varying flowrates, currents, and voltage thresholds using our similarity variables to highlight trade-offs among salt removal, energy, and throughput performance. (C) 2018 Elsevier Ltd. All rights reserved.

【 授权许可】

Free