Simulation of runaway electron production with CQL3D coupled to NIMROD

Nuclear Fushion

article

Yu.V. Petrov¹  C.C. Kim²  L.L. Lao³  R.W. Harvey¹ 

[1] CompX;SLS2 Consulting;General Atomics

关键词: simulation;    runaway electrons;    Fokker–Planck;    CQL3D;    NIMROD;   

DOI  :  10.1088/1741-4326/ac7b36

来源: Institute of Physics Publishing Ltd.

【 摘 要 】

A coupling between two distinctly different codes—one magnetohydrodynamic (MHD) and another kinetic—is achieved and applied for simulation of runaway electron (RE) production. The 3D initial value MHD code NIMROD simulates a DIII-D pure neon shattered pellet injection plasma quench including the propagation and ablation of the fragments, ionization and recombination of the impurities, and the radiated and transported energies. The field data from NIMROD is then used by the bounce-averaged Fokker–Planck Collisional QuasiLinear 3D (CQL3D) kinetic code to simulate the production of REs and their radial transport. The coupling procedure involves mapping of data between different grids and adjustment of the NIMROD toroidal electric field when REs appear. It is shown that without the radial transport, a large RE current is generated, up to 30% of the pre-pellet ohmic current. However, when the radial transport is included in CQL3D, the RE current is reduced to undetectable level, consistent with experiment. Various forms of the radial diffusion are surveyed to determine conditions when the fast electrons would not have time to be accelerated to relativistic energies before they are lost to chamber wall.

【 授权许可】

Unknown