Fabrication, Testing and Machining of Hybrid Basalt-Glass Fiber Reinforced Plastic composite

Indian Journal of Pure & Applied Physics

article

Akshay Jain¹  Bhagat Singh²  Kapil K Sharma³  Yogesh Shrivastava³ 

[1] Department of Mechanical Engineering, Poornima College of Engineering;Department of Mechanical Engineering, Jaypee University of Engineering and Technology;Department of Mechanical Engineering, Galgotias College of Engineering and Technology

关键词: Fiber reinforced plastic composite;    Response surface methodology;    Laser beam machining;    Box Behnken design;    Hand layup method;    Article;   

来源: National Institute of Science Communication and Information Resources

【 摘 要 】

In modern industries, basalt and glass are the most commonly used fibers for the fabrication of various engineering components. Present work is focused on the fabrication of hybrid fiber reinforced plastic (FRP) composites, comprises of basalt and glass fibers. The aim of the work is to fabricate a composite justifying the current requirement of the era followed by the identification of the capabilities of fabricated composite by investigating its mechanical properties. Further, the machining of the fabricated composite has also been explored in order to limit the common problems in machining like fiber pull-out and delamination. From the results, it has been perceived that the fabricated composite can be machined flawlessly using laser beam machine subjected to the selection of input parameters. The proposed methodology seems helpful for researchers in fabricating the FRP composite and in identifying the range of input parameters suitable for machining.

【 授权许可】

Unknown