Network Topology Based Back/ForwardSweeping for Load Flow of RadialDistribution Systems

International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering

article

Soumitri Jena¹  Abhisek Mishra¹  Vivek Rastogi¹ 

[1] Dept. of EE, National Institute of Technology

关键词: Radial distribution system;    load flow;    Network topology;    Back/forward sweep.;   

DOI  :  10.15662/ijareeie.2014.0311018

来源: Research & Reviews

【 摘 要 】

This paper presents a simple network topology based back/forward sweeping method for radial distribution systems. This method uses networktopology based matrices and KCL , KVL based equations. The data are stored in matrix form, then the memory requirement is very less.The current and voltage values have been updated in two subsequent sweeps (Backward and Forward). The requirement of sequential branch numbering has been averted. This method has been tested to IEEE 33 and 69 test systems and time required and accuracy has been found satisfying.

【 授权许可】

Unknown