A continuous time level-crossing ADC with adaptive sampling for biomedical application

IEICE Electronics Express

article

Rongshan Wei¹  Fangjun Lin¹  Qunchao Chen¹ 

[1] College of Physics and Information Engineering, Fuzhou University

关键词: analog-to-digital converter;    level-crossing;    adaptive sampling;   

DOI  :  10.1587/elex.19.20220072

学科分类：电子、光学、磁材料

来源: Denshi Jouhou Tsuushin Gakkai

【 摘 要 】

To reduce the power consumption of a bio-electrical signal detection system, a level-crossing analog-to-digital converter (LC-ADC) with low power consumption was proposed for biomedical signal detection. An adaptive resolution sampling mode is also designed to reduce power consumption on the original basis. The level-crossing ADC is designed and simulated using a 180-nm CMOS process. The measurement results show that the power consumption is only 197nW, the effective number of bits is 6.4 bits and the signal-to-noise and distortion ratio is 41.6dB under 0.8V power supply voltage. The proposed LC-ADC uses a chip area of 0.147mm2 and the FOM is 278fJ/conversion.

【 授权许可】

CC BY