Quantitative analysis of nano-scale pore structures of broad sense shale oil reservoirs using atomic force microscopy

Energy Exploration & Exploitation

Review Article

Lei Wang¹  Xiaoming Lang¹  Hang Yang²  Wei Xiong²  Hongtao Zhou²  Rui Shen²  Hekun Guo²  Xiaoyi Zhang² 

[1] Exploration and Development Research Institute of North China, Oilfield Company of PetroChina, Renqiu, China;Research Institute of Petroleum Exploration & Development, PetroChina Company Limited, Beijing, China;

关键词: Atomic force microscopy;    shale oil;    pore distribution;    surface roughness;    lithology;   

DOI  :  10.1177/01445987211022522

来源: Sage Journals

【 摘 要 】

The rapid and cost-effective quantitative characterization of broad-sense shale oil reservoirs is highly challenging due to the complex lithology and strong heterogeneity of the strata. In this paper, the pore structures and surface roughness of samples of various lithologies from a shale oil reservoir were studied using atomic force microscopy (AFM) and the open-source Gwyddion analytical software. The surface morphology was reconstructed both two-dimensionally and three-dimensionally using the AFM data for the mudstone, siltstone, and dolarenite in a broad-sense shale oil reservoir. The surface roughness was evaluated with respect to parameters such as the arithmetic average roughness, root mean square roughness, surface skewness, and kurtosis coefficient. The pores of various scales were quantitatively identified using the watershed algorithm. The samples were also evaluated using focused ion beam scanning electron microscopy for comparison, and the derived pore scales are consistent with those obtained from the AFM analysis. In conclusion, the utilization of AFM and open-source software provides a new easy-to-operate method, which can be widely applied to characterize the surface roughness and pore structures of unconventional oil and gas reservoirs.

【 授权许可】

CC BY   
© The Author(s) 2021

【 图 表 】

Figure 13.

Figure 12.

Figure 11.

Figure 10.

Figure 9.

Figure 8.

Figure 7.

Figure 6.

Figure 5.

Figure 4.

Figure 3.

Figure 2.

Figure 1.