Macro-mechanical strut and tie model for analysis of fibrous high-strength concrete corbels

Ain Shams Engineering Journal

关键词: Reinforced concrete;    Corbels;    Macro-mechanical;    Modeling;    Fibrous;    High strength;   

DOI  :  10.1016/j.asej.2012.04.004

来源: DOAJ

【 摘 要 】

Reinforced concrete (RC) corbels becoming a frequent attribute in the building construction with the increasing use of pre-cast high-strength concrete (HSC). The use of fibrous high-strength concrete (FHSC), increases corbel ductility and thus defines the mode of failure of the corbels, depending on the fiber parameters. In this paper a macro-mechanical strut and tie model is proposed for analysis of fibrous high-strength concrete corbels. In this model the fibers can be used as a replacement of horizontal stirrups, due to increasing of shear friction of (FHSC). The analytical macro-mechanical model takes into consideration the effect of fiber volume, fiber length, and fiber diameter, random distribution of fibers, fiber HSC interface and shear span-to-depth ratio, respectively. This model is compared with available experimental results found in literature and a good agreement is obtained. The parametric study is performed to examine for different parameters affecting the analysis of (FHSC) corbels using the proposed macro-mechanical strut and tie model.

【 授权许可】

Unknown