Machines | |
Design of an Innovative Test Rig for Industrial Bearing Monitoring with Self-Balancing Layout | |
Eugenio Brusa1  Cristiana Delprete1  Luigi Gianpio Di Maggio1  Lorenzo Giorio1  Vittorio Zanella2  | |
[1] Department of Mechanical and Aerospace Engineering (DIMEAS), Politecnico di Torino, 10129 Torino, Italy;SKF Performance Engineering Center, 10024 Moncalieri, Italy; | |
关键词: bearing testing; smart bearing; bearing test rig; vibration; mechanical design; structural mechatronics; | |
DOI : 10.3390/machines10010054 | |
来源: DOAJ |
【 摘 要 】
The remote prognosis and diagnosis of bearings can prevent industrial system failures, but the availability of realistic experimental data, being as close as possible to those detected in industrial applications, is essential to validate the monitoring algorithms. In this paper, an innovative bearing test rig architecture is presented, based on the novel concept of “self-contained box”. The monitoring activity is applicable to a set of four middle-sized bearings simultaneously, while undergoing the independent application of radial and axial loads in order to simulate the behavior of the real industrial machinery. The impact of actions on the platform and supports is mitigated by the so-called “self-contained box” layout, leading to self-balancing of actions within the rotor system. Moreover, the high modularity of this innovative layout allows installing various sized bearings, just changing mechanical adapters. This leads to a reduction of cost as well as of system down-time required to change bearings. The test rig is equipped with suitable instrumentation to develop effective procedures and tools for in- and out-monitoring of the system. An initial characterization of the healthy system is presented.
【 授权许可】
Unknown