Investigation of competitive adsorption and desorption of heavy metals from aqueous solution using raw rock: Characterization kinetic, isotherm, and thermodynamic

MATEC Web of Conferences

Bassam Rajaa¹  El Mahi Chbihi Mohammed¹  Maissara Jabrane¹  Belaaouad Said¹  Jarmouni Nabila¹  El Alouani Marouane² 

[1] Laboratory of physical chemistry of materials LCPM, Faculty of Sciences Ben M’Sik, Hassan II University of Casablanca;Mohammed V University in Rabat, Centre des Sciences des Matériaux (CSM), Laboratoire de Physico-chimie des Matériaux Inorganiques et Organiques (LPCMIO). Ecole Normale Supérieure (ENS);

关键词: raw rock;    characterization;    heavy metals;    adsorption;    desorption;    kinetic;    isotherm;    thermodynamic;   

DOI  :  10.1051/matecconf/202134801016

来源: DOAJ

【 摘 要 】

Heavy metals are the most dangerous inorganic pollutants Due to their bioaccumulation and their nonbiodegradability, for this, several studies have focused on the recovery of these metals from water using different techniques. In this context, our study consists of evaluating an efficient and eco-friendly pathway of competitive recovery of heavy metals (Cd, Cr and As) from aqueous solutions by adsorption using raw rock. This adsorbent was characterized before and after the adsorption process by several techniques. The multi-metals adsorption process in the batch mode was undertaken to evaluate the effect of adsorbent mass, contact time, pH, Temperature, and initial heavy metals concentration. The kinetic data were analyzed using the pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetic models. According to the modeling of the experimental results, the adsorption kinetics of heavy metals were adapted to the pseudo-second-order model. The adsorption isotherms were evaluated by the Langmuir and Freundlich isotherm models. The experimental isotherm data of heavy metals were better fitted with the Langmuir model rather than Freundlich isotherm models. The maximum experimental adsorption capacities (Qmax) predicted by the Langmuir model are 15.23 mg/g for Cd (II), 17.54 mg/g for Cr (VI) and 16.36 mg/g for As (III). The values of thermodynamic parameters revealed that the heavy metals adsorption was exothermic, favorable, and spontaneous in nature. The desorption process of heavy metals showed that this raw rock had excellent recycling capacity. Based on the results, these untreated clays can be used as inexpensive and environmentally friendly adsorbents to treat water contaminated by heavy metals.

【 授权许可】

Unknown