Preparation and Characterization of Lithium Zirconium Silicate for CO2 Capture

Bulletin of Chemical Reaction Engineering & Catalysis

A. G. Gaikwad¹  T.S. Bhosale¹ 

[1] Chemical Engineering and Process Development Division, National Chemical Laboratory, Pune 411 008,;

关键词: Lithium zirconium silicate;    Preparation method;    sol gel method,template method;    characterization;    CO2 capture;   

DOI  :  10.9767/bcrec.9.3.6646.249-262

来源: DOAJ

【 摘 要 】

The samples of lithium zirconium silicate were prepared by precipitation, template and sol-gel meth-ods. The samples were prepared with several mol ratios of Li:Zr:Si. The preparation of lithium zirco-nium silicate samples by precipitation method were carried out by using the lithium nitrate, zirconyl nitrate, zirconium(IV) oxypropoxide and tetramethylorthosilicate (TEOS) as precursors. The samples of lithium zirconium silicate were prepared by using cetyltrimethyl-ammonium bromide (C-TAB) and tetramethyl ammonium hydroxide (TMAOH) by template method. The samples of lithium zirconium silicate were characterized by XRD, TEM, SEM, 29Si-MAS NMR and FTIR. The surface area, alkalinity / acidity of the samples of lithium zirconium silicate were measured. The TGA analysis of lithium zirco-nium silicate samples was done. The CO2 captured by the samples of lithium zirconium silicate was es-timated. The captured CO2 by the samples of lithium zirconium silicate was found to be in the range 3.3 to 8.6 wt%. © 2014 BCREC UNDIP. All rights reserved

Received: 27th March 2014; Revised: 31st July 2014; Accepted: 2nd August 2014

How to Cite: Bhosale, T.S. , Gaikwad, A.G. (2014). Preparation and Characterization of Lithium Zirconium Silicate for CO2 Capture. Bulletin of Chemical Reaction Engineering & Catalysis, 9(3): 249-262. (doi:10.9767/bcrec.9.3.6646.249-262)

Permalink/DOI: http://dx.doi.org/10.9767/bcrec.9.3.6646.249-262

【 授权许可】

Unknown