Variable DC-Link Voltage Control of Dual Active Bridge Converter in a Standalone Wind Power Generation System for High-Efficiency Battery-Discharging Operation

Energies

Hiroaki Yamada¹  Yuto Takayama¹ 

[1] Graduate School of Sciences and Technology for Innovation, Yamaguchi University, 2-16-1 Tokiwadai, Ube 755-8611, Japan;

关键词: variable DC-link voltage control;    dual active bridge converter;    standalone wind powergeneration system;    battery-discharging mode;   

DOI  :  10.3390/en14206786

来源: DOAJ

【 摘 要 】

In this study, we deal with a dual active bridge (DAB) converter-based battery charger in a standalone wind power generation system (WPGS) with a small-scale wind turbine. However, the power conversion efficiency under the low power output in the discharging mode is low. In this paper, we propose variable DC-link voltage control in a standalone WPGS with a DAB converter under a light load. The proposed control can compensate for the shortage of generated power and suppress the peak value of the transformer current. Simulation results demonstrate that the proposed control can decrease the peak value of the transformer current and improve the power conversion efficiency of the DAB converter. An experimental setup was constructed to confirm the basic operation of the variable DC-link voltage control. In addition, a reference DC-link voltage switchover control is proposed to enable a high-efficiency drive under all load ranges. From simulation results, the power loss can be reduced by the switchover control of the reference DC-link voltage.

【 授权许可】

Unknown