Fermentative production and optimization of mevastatin in submerged fermentation using Aspergillus terreus

Biotechnology Reports

M. Rajasimman¹  Mahin Basha Syed² 

[1] Annamalai University, Annamalainagar-608002, Tamilnadu, India;Environmental Engineering Lab, Nawab Shah Alam Khan College of Engineering and Technology, Malakpet, Hyderabad-500024, India;

关键词: Mevastatin;    PB design;    Response surface methodology;    Aspergillus terreus;    Submerged fermentation;   

DOI  :  10.1016/j.btre.2015.04.002

来源: DOAJ

【 摘 要 】

The main objective of the study is to enhance the mevastatin production using Plackett–Burman (PB) and central composite design (CCD) by Aspergillus terreus in submerged fermentation (SmF). Eight nutrients were chosen for a PB design with 12 experimental runs. A maximum mevastatin production of 170.4 mg L−1 was obtained in PB design. Response surface methodology (RSM) is a sequential procedure with an initial objective to lead the experimenter rapidly and efficiently along a path of improvement toward the general vicinity of the optimum. The individual and interactive effects of these variables were studied by conducting the fermentation run at randomly selected and different levels of all five factors. Experiments were conducted to optimize the medium constituents like glycerol, CuCl2·2H2O, FeSO4·7H2O, KH2PO4 and MgSO4·7H2O. At the optimum condition, a maximum mevastatin production of 701 mg L−1 was obtained.

【 授权许可】

Unknown