期刊论文详细信息
eXPRESS Polymer Letters
Starch-based nanocomposites reinforced with flax cellulose nanocrystals
关键词: Nanocomposites;    Reinforcement;    Starch;    Flax;    Mechanical properties;   
DOI  :  10.3144/expresspolymlett.2008.60
来源: DOAJ
【 摘 要 】

In this study, the cellulose crystals, prepared by acid hydrolysis of flax fiber, consisted of slender rods with lengths ranging from 100 to 500 nm and diameters ranging from 10 to 30 nm, respectively. After mixing the suspension of flax cellulose nanocrystals (FCNs) and plasticized starch (PS), the nanocomposite films were obtained by the casting method. The effects of FCNs loading on the morphology, thermal behaviour, mechanical properties and water sensitivity of the films were investigated by means of wide-angle X-ray diffraction, differential scanning calorimetry, tensile testing, and water absorption testing. Scanning electron microscopy photographs of the failure surfaces clearly demonstrated a homogeneous dispersion of FCNs within the PS matrix and strong interfacial adherence between matrix and fillers, which led to an increase of glass transition temperature ascribed to the starch molecular chains in the starch-rich phase. In particular, these nanocomposite films exhibited a significant increase in tensile strength and Young’s modulus from 3.9 to 11.9 MPa and from 31.9 to 498.2 MPa, respectively, with increasing FCNs content from 0 to 30 wt%. Also, with a loading of FCNs, the resulting nanocomposite films showed a higher water resistance. Therefore, FCNs played an important role in improving the mechanical properties and water resistance of the starch-based materials.

【 授权许可】

Unknown   

  文献评价指标  
  下载次数:0次 浏览次数:0次