Effect of molding processes on multiaxial fatigue strengthin short fibre reinforced polymer

Frattura ed Integrità Strutturale

Takahiko Sawada¹  Hiroshi Aoyama¹ 

[1] Research & Development Group, Hitachi, Ltd.,Japan;

关键词: Short-fibre reinforced plastics;    Multiaxial;    Fatigue;    Tsai-Hill;   

DOI  :  10.3221/IGF-ESIS.38.12

来源: DOAJ

【 摘 要 】

This study concerns the multiaxial static and fatigue strength properties. Short-glass-fibre-reinforced phenolic-resin composites (SGP) molded by injection and compression processes were subjected to tensiontorsion combined static and fatigue tests at room temperature under various test conditions. Tension – torsion combined static strength well agreed with Tsai-Hill failure criteria without depending on processes. Relationships between the maximum principal stress, σp1, max, and the number of fracture cycles, Nf, were approximately linear in the whole range of up to 106 cycles. For a unified evaluation of multiaxial fatigue life for SGP, non-dimensional effective stress, σ*, defined by modifying Tsai-Hill failure criteria was applied. The slopes of σ*- Nf curves according to Baskin’s law were almost identical to the injection (n = 26.3) and compression (n = 26.2). We finally confirmed that the multiaxial fatigue life of SFRP could be predicted by using σ* with a unique Wöhler curve without relying on molding processes

【 授权许可】

Unknown