The use of synthesis methods in position optimisation and selection of tuned mass damper (TMD) parameters for systems with many degrees of freedom

Archives of Control Sciences

Tomasz Dzitkowski¹  Andrzej Dymarek¹ 

[1] Departament of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland;

关键词: structural control system;    vibration;    simple fractions;    synthesis;    rational functions;    dynamic characteristics;   

DOI  :  https://doi.org/10.24425/acs.2021.136886

来源: DOAJ

【 摘 要 】

The paper formulates and formalises a method for selecting parameters of the tuned mass damper (TMD) for primary systems with many degrees of freedom. The method presented uses the properties of positive rational functions, in particular their decomposition, into simple fractions and continued fractions, which is used in the mixed method of synthesis of vibrating mechanical systems. In order to formulate a method of tuning a TMD, the paper discusses the basic properties of positive rational functions. The main assumptions of the mixed synthesis method is presented, based on which the general method of determining TMD parameters in the case of systems with many degrees of freedom was formulated. It has been shown that a tuned mass damper suppresses the desired resonance zone regardless of where the excitation force is applied. The advantages of the formulated method include the fact of reducing several forms of the object’s free vibration by attaching an additional system with the number of degrees of freedom corresponding to the number of resonant frequencies reduced. In addition, the tuned mass damper determined in the case of excitation force applied at a single point can be attached to any element of the inertial primary system without affecting the reduction conditions in this way. It results directly from the methodology formalised in the paper. As part of the paper, numerical calculations were performed regarding the tuning of the TMD to the first form of free vibration of a system with 3 degrees of freedom. The parameters determined were subjected to analysis and verification of the correctness of the calculations carried out. For the considered case of a system with 3 degrees of freedom together with a TMD, time responses of displacement, from each floor, were generated to excitation induced by a harmonic force equal to the first form of vibration of the basic system. In addition, in the case of the parameters obtained, the response of the inertial element system to which the TMD was attached to random white noise excitation was determined.

【 授权许可】

Unknown