Study on the use of Aerogel on the Surface of Basalt Fabric

Autex Research Journal

Miśkiewicz Pamela¹  Frydrych Iwona¹  Tokarska Magdalena¹ 

[1] Faculty of Material Technologies and Textile Design, Institute of Architecture of Textiles, Lodz University of Technology, Lodz, Poland;

关键词: aerogel;    basalt fabric;    protective gloves;    hot work environment;    surface roughness;    cielab;   

DOI  :  10.2478/aut-2019-0054

来源: DOAJ

【 摘 要 】

The layer of aerogel was applied to the surface of basalt fabric due to the possibility of improving a fabric protecting against the influence of hot environmental factors. The analysis of aerogel surface roughness and thickness of the obtained sample, resistance to contact heat for the contact temperature between 100°C and 250°C, and tests of resistance to the penetration of thermal radiation were carried out. In addition, thermal conductivity, thermal resistance, thermal diffusion, thermal absorption, and surface roughness were determined. The obtained results indicate the unevenness of aerogel application on the surface of basalt fabric. For this reason, work should be carried out on an appropriate technology that will allow them to be applied evenly on the surface of the fabric. The parameters tested and the results obtained are promising in terms of the possibility of using the fabric obtained in protective gloves.

【 授权许可】

Unknown