Differences in the response to in-phase and out-of-phase multiaxial high-cycle fatigue loading

Frattura ed Integrità Strutturale

Josef Jurenka¹  Jan Papuga¹  Martin Nesládek¹ 

[1] Faculty of Mechanical Engineering, Czech Technical University in Prague;

关键词: Proportional loading;    Non-proportional loading;    Out-of-phase loading;    Phase shift;    Multiaxial fatigue;    Fatigue strength;   

DOI  :  

来源: DOAJ

【 摘 要 】

This paper discusses the phase shift effect occurring between two and more load channels of multiaxially loaded specimens. The discussion concludes that there is an extreme shortage of good experimental data that would prove the existence and the trend of the phase shift effect in the high-cycle fatigue region. It is no wonder that there are so many fatigue strength estimation criteria that use quite different computational concepts, because the response to the phase shift effect in the experimental base is often hidden in a conglomeration of other interacting effects. The paper presents results of a sensitivity study that compares the fatigue strength estimation results for various such criteria for the same stress amplitudes, but for different phase shifts between the push-pull and torsion load channels. These results show that, with the exception of criteria, that assume a zero phase shift effect, the phase shift affects the results of each studied fatigue strength estimation criterion in a different way. If well-organized experiments were available, experiments corresponding to the described comparison between in-phase and out-of-phase loading would show the right trends, and the optimum criterion could be selected. A proposal for such an experimental setup is provided in the paper.

【 授权许可】

Unknown