Investigation of temperature characteristics of multiphase AC arc by high-speed visualization

Journal of Fluid Science and Technology

Takayuki WATANABE¹  Tomoyuki IMATSUJI¹  Taro HASHIZUME¹  Manabu TANAKA¹  Hisao NAGAI²  Takafumi OKUMA²  Takeshi KOIWASAKI² 

[1] Department of Chemical Engineering, Kyushu University;Panasonic Corp.;

关键词: thermal plasma;    high-speed imaging;    temperature measurement;    arc fluctuation;   

DOI  :  10.1299/jfst.2017jfst0024

来源: DOAJ

【 摘 要 】

The objective of the present study is to understand fluctuation phenomena in a multiphase AC arc as a heat source for material processing based on the high-speed visualization technique of the temperature field. The multiphase AC arc is one of the most attractive thermal plasmas which possess extremely high temperature, high chemical reactivity, rapid quenching capability, and selectivity of the reaction atmosphere in accordance with required chemical reaction. In particular, the multiphase AC arc has a strong advantage on higher energy efficiency compared with other thermal plasmas. Therefore, this heat source has been applied to innovative material processing such as in-flight glass melting. However, the temporal and spatial characteristics of the multiphase AC arc have not been clarified although these are essential to control the characteristics of the products such as particle size distribution, yields of the desired materials. The high-speed visualization of the temperature field of the multiphase AC arc was conducted at 1x104 fps as typical framerate to observe the dynamic behavior of the multiphase AC arc in millisecond time scale. An optical system including the band-pass filters was combined with the high-speed camera to observe particular line emissions from atomic argon with negligible emissions from thermal plasma. The obtained experimental results indicated that the temperature of the multiphase AC arc was around 1.0x104 K. The arc temperature fluctuated in the range from 0.6x104 to 1.3x104 K. Consequently, the arc temperature in the multiphase AC arc is sufficiently high to treat the refractory metals and/or ceramics powders. Furthermore, the obtained temperature was well-validated by the conventional spectroscopic method with high accuracy.

【 授权许可】

Unknown