Application and Analysis of Discrete Fiber Probes in Determining Detonation Velocity of Microcharges

Micromachines

Guodong Zhang¹  Yulong Zhao¹  Jing Sun¹ 

[1] State Key Laboratory for Manufacturing Systems Engineering, Xi’an Jiaotong University, Xi’an 710054, China;

关键词: detonation velocity;    microcharges;    fiber probe;   

DOI  :  10.3390/mi12121524

来源: DOAJ

【 摘 要 】

This paper describes a method based on discrete fiber probes for measuring detonation velocity produced by microcharges. This method is simple to implement, scalable for multi-channel and requires minimal perturbation to the detonation wave. A simple experimental apparatus was established by using the oscilloscope, photodetectors, optical fibers, alignment device and initiation system. Four groups of experiments were carried out for analyzing the influence of probe spacing on detonation velocity. The experiment results suggest that a relatively appropriate distance between two adjacent fiber probes is 4 mm. In addition, the comparative experiments between ionization probes and fiber probes were performed, which shows that the standard deviation of detonation velocity obtained by fiber probes is smaller under the same measurement conditions. This research may be useful for the development of determining detonation velocity precisely of microcharges.

【 授权许可】

Unknown