Explosive Cladding of Titanium and Aluminium Alloys on the Example of Ti6Al4V-AA2519 Joints / Wybuchowe Platerowanie Stopów Tytanu I Aluminium Na Przykładzie Połączenia Ti6Al4V-AA2519

Archives of Metallurgy and Materials

A. Gałka¹  M. Najwer¹ 

[1] High -Energy Techniques Works „Explomet” Ga?ka, Szulc S .J., 100H O?wi?cimska St r., 45-641 Opole, Poland

关键词: Keywords: explosive cladding;    detonation velocity;    Ti6Al4V-AA2519 clad;   

DOI  :  10.1515/amm-2015-0477

学科分类：金属与冶金

来源: Akademia Gorniczo-Hutnicza im. Stanislawa Staszica / University of Mining and Metallurgy

【 摘 要 】

Explosive cladding is currently one of the basic technologies of joining metals and their alloys. It enables manufacturing of the widest range of joints and in many cases there is no alternative solution. An example of such materials are clads that include light metals such as titanium and aluminum. ach new material combination requires an appropriate adaptation of the technology by choosing adequate explosives and tuning other cladding parameters. Technology enabling explosive cladding of Ti6Al4V titanium alloy and aluminum AA2519 was developed. The clads were tested by means of destructive and nondestructive testing, analyzing integrity, strength and quality of the obtained joint.

【 授权许可】

Unknown