Model of Electric and Heat Balance of Biogas Station

Advances in Electrical and Electronic Engineering

Jiri Jansa¹  Zdenek Hradilek¹ 

[1] Department of Electrical Power Engineering, Faculty of Electrical Engineering and Computer Science, VSB-Technical University of Ostrava, 17. listopadu 15, 708 33, Ostrava, Czech Republic;

关键词: biogas station;    energetic balance;    heat losses;    model;    power losses.;   

DOI  :  10.15598/aeee.v14i5.1811

来源: DOAJ

【 摘 要 】

This paper deals with the model of a biogas station. The introduction provides a description of principle employed in this model. The model works with data reflecting the quantity and type of the input biomass to determine the potential energy and offer a selection from various co-generation units. Other important input parameters comprise fermentors and mainly the material composition of their walls to help with determination of heat losses. The input parameters are accompanied by the energetic balance model for a Biogas Station (BPS) concerned. The next section of this paper provides verification of the model with respect to an actual BPS subject to a series of measurements. These measurements focus on electric and heat parameters. The outcome from these measurements was then used to obtain the energetic balance figure. The comparison of measurement results against the model produces slight deviations of the model from the real biogas station only. This paper has been processed pursuant to a long-term research on biogas stations. The biogas station model will be developed further to obtain a more detailed energetic balance for the biogas station.

【 授权许可】

Unknown