Investigation of riprap stability of a dam: risk assessment by InSAR method and rock mechanical test

Geomatics, Natural Hazards & Risk

Mehrnoosh Ghadimi¹ 

[1] Department of Physical Geography, Faculty of Geography, University of Tehran, Iran;

关键词: Riprap;    erosion;    dam deformation;    Sentinel-1A;    Los Angeles test;   

DOI  :  10.1080/19475705.2022.2077145

来源: DOAJ

【 摘 要 】

Riprap resistance is a widely used solution for protecting earth dams from erosion but riprap can be displaced on the dam surface. This study examines the stability of riprap in the Taleqan Dam, Iran using rock mechanical tests and InSAR technology. Uplift of dam stairs and erosion of the riprap material have been observed during field work at the study site, and samples have been gathered from three rock categories. The purpose of this study is to explore the factors influencing the deformation of the Taleqan Dam. The InSAR method has been employed for monitoring surface deformation and the Los Angeles ASTM C test was used to establish the cause of dam deformation. InSAR analysis was carried out using Sentinel-1A images from 2014 to 2019. The results revealed subsidence at an average rate of 4 mm/yr over that period. The results of Los Angeles ASTM C indicated that the Andesite riprap was more easily eroded, has a relatively low durability and specific weight, and low resistance erosion. Therefore it is unsuitable for use as a protection layer for the crest and lower sectors of the riprap. It can also be concluded that the inadequate durability of certain rock materials may potentially cause weathering, depression, reduced thickness and displacement of the riprap.

【 授权许可】

Unknown