Survey on Field Programmable Analog Array Architectures Eliminating Routing Network

IEEE Access

Maha S. Diab¹  Soliman A. Mahmoud¹ 

[1] Department of Electrical Engineering, University of Sharjah, Sharjah, UAE;

关键词: Continuous-time;    field programmable analog array (FPAA);    filters;    operational transconductance amplifier (OTA);    second generation current conveyor (CCII+);    signal processing;   

DOI  :  10.1109/ACCESS.2020.3043292

来源: DOAJ

【 摘 要 】

This work focuses on reviewing the field programmable analog array (FPAA) architectures that eliminate the use of switches in signal path. The conventional FPAA architecture is composed of configurable analog blocks (CABs) connected together through switches in routing networks.The architectures covered in this survey have replaced the use of routing network by direct connection between CABs, and use of programmable analog building blocks. The first architecture covered is presented by Becker et al. with a hexagonal topology using operational transconductance amplifier (OTA) as a building block. The second architecture is presented by Mahmoud and Soliman, which uses the second generation current conveyor (CCII+) as a building block for their CABs arranged in a hexagonal architecture as well. Lastly, a more recent FPAA with a rectangular architecture proposed by Diab and Mahmoud is discussed, it uses the OTA as a building block for their rectangular architecture. The three FPAAs targeted continuous-time analog signal processing, having two architectures targeting high frequency applications, while the last targeting low frequency applications. The architectures, CAB structures, and the applications of each FPAA is covered separately in each section.

【 授权许可】

Unknown