Rapid Fabrication of Epidermal Paper-Based Electronic Devices Using Razor Printing

Micromachines

RamsesV. Martinez¹  Behnam Sadri¹  Debkalpa Goswami¹ 

[1] School of Industrial Engineering, Purdue University, 315 N. Grant Street, West Lafayette, IN 47907, USA;

关键词: epidermal sensors;    stretchable electronics;    wireless power;    hydrophobic paper;    wearable stimulators;    paper electronics;    low-cost manufacture;   

DOI  :  10.3390/mi9090420

来源: DOAJ

【 摘 要 】

This work describes the use of a benchtop razor printer to fabricate epidermal paper-based electronic devices (EPEDs). This fabrication technique is simple, low-cost, and compatible with scalable manufacturing processes. EPEDs are fabricated using paper substrates rendered omniphobic by their cost-effective silanization with fluoroalkyl trichlorosilanes, making them inexpensive, water-resistant, and mechanically compliant with human skin. The highly conductive inks or thin films attached to one of the sides of the omniphobic paper makes EPEDs compatible with wearable applications involving wireless power transfer. The omniphobic cellulose fibers of the EPED provide a moisture-independent mechanical reinforcement to the conductive layer. EPEDs accurately monitor physiological signals such as ECG (electrocardiogram), EMG (electromyogram), and EOG (electro-oculogram) even in high moisture environments. Additionally, EPEDs can be used for the fast mapping of temperature over the skin and to apply localized thermotherapy. Our results demonstrate the merits of EPEDs as a low-cost platform for personalized medicine applications.

【 授权许可】

Unknown