28-GHz CMOS Direct-Conversion RF Transmitter with Precise and Wide-Range Mismatch Calibration Techniques

Electronics

Byeonghyeon Kim¹  Hyunchol Shin¹  Yongho Lee¹ 

[1] Department of Electronic Convergence Engineering, Kwangwoon University, Seoul 01897, Korea;

关键词: RF transmitter;    RF transceiver;    calibration;    millimeter-wave;    28 GHz;    5G;   

DOI  :  10.3390/electronics11060840

来源: DOAJ

【 摘 要 】

A millimeter-wave direct-conversion radio-frequency (RF) transmitter requires precise in-/quadrature-phase (I/Q) mismatch calibration and dc offset cancellation to minimize image rejection ratio (IRR) and LO feedthrough (LOFT) for ensuring satisfactory output spectral purity. We present a 28-GHz CMOS RF transmitter with an improved calibration technique for fifth generation (5G) wireless communication applications. The RF transmitter comprises a baseband amplifier, quadrature up-conversion mixer, power amplifier driver, and quadrature LO generator. The I/Q amplitude mismatch is calibrated by tuning the gate biases of the switching stage FETs of the mixer, the I/Q phase mismatch is calibrated by tuning the varactor capacitances at the LC load of LO buffer, and the dc offset is cancelled by tuning the body voltages of the differential-pair FETs at the baseband amplifier. The proposed technique provides precise calibration accuracy by employing mV-resolution tuning voltage generation via 6-bit voltage digital-to-analog converters. It also covers wide calibration range while minimizing the impact on the circuit’s bias point and dissipated current during calibration. Implemented in a 65 nm CMOS process, the RF transmitter integrated circuit shows output-referred 1 dB compression power of +6.5 dBm, saturated output power of +12.6 dBm, and an operating band of 27.5–29.3 GHz while demonstrating satisfactory performances of −55.9 dBc of IRR and −36.8 dBc of LOFT.

【 授权许可】

Unknown