Real-Time Size and Mass Estimation of Slender Axi-Symmetric Fruit/Vegetable Using a Single Top View Image

Sensors

Tri Huynh¹  Ly Tran²  Son Dao² 

[1] School of Electrical Engineering, International University, Vietnam National University HCMC, Ho Chi Minh City 700000, Vietnam;School of Industrial Engineering and Management, International University, Vietnam National University HCMC, Ho Chi Minh City 700000, Vietnam;

关键词: volume estimation;    mass estimation;    fruit;    image processing;    machine vision;    fruit;   

DOI  :  10.3390/s20185406

来源: DOAJ

【 摘 要 】

Among the physical attributes of agricultural materials, mass, volume, and sizes have always been important quality parameters. Previous research focused mostly on volume estimation using stereo-based approaches, which rely on manual intervention or require a multiple-cameras set up or multiple-frames captures from different viewing angles to reconstruct the three-dimensional point-cloud information. These approaches are tedious and not suitable for practical machine vision systems. In this work, we only use a single camera mounted on the ceiling of the imaging chamber, which is directly above the fruit/vegetable to capture its top-view, two-dimensional image. We developed a method to estimate the mass/volume of agricultural products with axi-symmetrical shapes such as a carrot or a cucumber. The mass/volume is estimated as the sum of smaller standard blocks, such as chopped pyramids, an elliptical cone, or a conical cone. The computed mass/volume showed good agreement with analytical and experimental results. The weight estimation error is 95% for the case of the carrot and 96.7% for the cucumber. The method proved to be sufficiently accurate, easy to use, and rotationally invariant.

【 授权许可】

Unknown