Pelletizing of Various Municipal Solid Waste: Effect of Hardness and Density into Caloric Value

Ecological Engineering & Environmental Technology

Iva Yenis Septiariva¹  Bimastyaji Surya Ramadan²  Eva Nur Fauziah³  Mega Mutiara Sari³  I Wayan Koko Suryawan³  Jun-Wei Lim⁴  Kuntum Khoiro Ummatin⁵ 

[1] Civil Engineering Study Program, Faculty of Engineering, Universitas Sebelas Maret, Jl. Ir. Sutami 36A Surakarta 57126, Indonesia;Department of Environmental Engineering, Faculty of Engineering, Universitas Diponegoro, Semarang, 50275, Indonesia;Department of Environmental Engineering, Faculty of Infrastructure Planning, Universitas Pertamina, Komplek Universitas Pertamina, Jalan Sinabung II, Terusan Simprug, Jakarta 12220, Indonesia;Department of Fundamental and Applied Sciences, HICoE-Centre for Biofuel and Biochemical Research, Institute of Self-Sustainable Building, Universiti Teknologi PETRONAS, Seri Iskandar 32610, Perak DarulRidzuan, Malaysia;Engineering Management, Industrial and Agroindusty Technology Faculty, Universitas Internasional Semen Indonesia, Kompleks PT. Semen Indonesia (Persero) Tbk, Jl. Veteran, Kb. Dalem, Sidomoro, Kebomas, Gresik 61122, East Java, Indonesia;

关键词: density;    hardness;    waste;    caloric value;    rdf pellets;   

DOI  :  10.12912/27197050/145825

来源: DOAJ

【 摘 要 】

Density and hardness are physical parameters in the manufacture of refuse derived fuel (RDF) pellets. In making pellets, we also want to achieve a high heating value for the combustion system. This research aims to analyze the mixture of municipal solid waste to its density and hardness and study its correlation to heating value. The variable used in this research is a mixture of paper waste and garden waste and food scraps and garden waste. The density and hardness for the mix of paper waste and garden waste were 1970.6 to 2474.8 kg/m3 and 37.8- 42.8HA, respectively. The mixture of food waste and garden waste has density and hardness of 1822 to 2276.7 kg/m3 and 17.4-37.8HA. The correlation between density and hardness on heating values did not reach a significance of 0.05, so there was no strong relationship between density and hardness on heating values.

【 授权许可】

Unknown