Force transmission analysis of surface coating materials for multi-fingered robotic grippers

PeerJ Computer Science

关键词: Grasp;    Force transmission;    Material characteristics;    Robot gripper;    Robot finger coating;   

DOI  :  10.7717/peerj-cs.401

来源: DOAJ

【 摘 要 】

Robotic systems are generally used for grasping, carrying, holding, and many similar operations, typically in industrial applications. One of the most important components of robotic systems is robot grippers for the aforementioned operations, which are not only mission-critical but also represent a significant operational cost due to the time and expense associated with replacement. Grasping operations require sensitive and dexterous manipulation ability. As a consequence, tactile materials and sensors are an essential element in effective robot grippers; however, to date, little effort has been invested in the optimization of these systems. This study has set out to develop inexpensive, easily replaced pads, testing two different chemical compositions that are used to produce a tactile material for robot grippers, with the objective of generating cost, time, and environmental savings. Each tactile material produced has its specific individual dimension and weight. First, each of the materials under construction was tested under different constant pressures, and its characteristics were analyzed. Second, each tactile material was mounted on a two-fingered robot gripper and its characteristics. Material characteristics were tested and analyzed as regards their ability to grasp different sizes and types of objects using the two-fingered robot gripper. Based on the analysis of the results the most sensitive and cost-effective material for industrial type multi-fingered grippers was identified.

【 授权许可】

Unknown