Phase Change Materials for Reducing Cooling Energy Demand and Improving Indoor Comfort: A Step-by-Step Retrofit of a Mediterranean Educational Building

Energies

RosaFrancesca De Masi¹  Fabrizio Ascione²  Margherita Mastellone²  Nicola Bianco²  GiuseppePeter Vanoli³ 

[1] Department of Engineering, Università degli Studi del Sannio, Piazza Roma 21, 82100 Benevento (BN), Italy;Department of Industrial Engineering, Università degli Studi di Napoli Federico II, Piazzale Tecchio 80, 80125 Napoli (NA), Italy;Department of Medicine and Health Sciences “Vincenzo Tiberio”, Università degli Studi del Molise, Via Francesco De Sanctis 1, 86100 Campobasso (CB), Italy;

关键词: energy retrofit;    simulation;    educational buildings;    cost-optimal;    cool roof;    green roof;    thermal insulation;    phase change materials;    vented façade;   

DOI  :  10.3390/en12193661

来源: DOAJ

【 摘 要 】

The present work concerns the energy retrofit of a public educational building at the University of Molise, located in Termoli, South Italy. The study provides a comparison of the results obtained by different dynamic simulations of passive strategies to improve thermal comfort and energy behavior of the building during the summer regime. Firstly, the building model was calibrated against historical consumption data. Then, a subsequent step involves the technical-economic analysis, by means of building performance simulations, of energy upgrading scenarios, specifically, cool roof and green roof technologies for the horizontal opaque envelope and thermal insulation, vented façade, and phase change materials’ applications for the vertical opaque envelope. Improving the indoor thermal comfort and reducing the thermal energy demand during summertime through innovative solutions will be the primary objective of the present study. The energy efficiency measures are compared from the energy, emissions, costs, and indoor comfort points of view. Phase Change Materials applied to the inner side of the external walls are analyzed in depth and, by varying their melting temperature, optimization of design is performed too. This innovative material, with a melting temperature of 23 °C and a freezing temperature of 21 °C, determines the reduction of summer energy consumption of 11.7% and the increase of summer indoor comfort of 215 h. Even if consolidated, other solutions, like the cool roof, green roof, thermal insulation, and vented façade induce improvements in terms of summer energy saving, and the percentage difference compared to the basic building is less than 2%. For this case study, a Mediterranean building, with construction characteristics typical of the 1990s, traditional passive technologies are not very efficient in improving the energy performance, so the investigation focused on the adoption of innovative solutions such as PCMs, for reducing summer energy demand and improving indoor thermal comfort.

【 授权许可】

Unknown