Improving Rheological and Mechanical Properties of Various Virgin and Recycled Polypropylenes by Blending with Long-Chain Branched Polypropylene

Polymers

Simone Knaus¹  Sascha Stanic²  Thomas Koch²  Vasiliki-Maria Archodoulaki²  Klaus Schmid³ 

[1] Institute of Applied Chemistry, TU Wien, Getreidemarkt 9, 1060 Vienna, Austria;Institute of Materials Science and Technology, TU Wien, Getreidemarkt 9, 1060 Vienna, Austria;Pergan GmbH, Schlavenhorst 71, 46395 Bocholt, Germany;

关键词: reactive extrusion;    long-chain branching;    recycled polypropylene;    blends;    upcycling;    rheology;   

DOI  :  10.3390/polym13071137

来源: DOAJ

【 摘 要 】

Blends of two long-chain branched polypropylenes (LCB-PP) and five linear polypropylenes (L-PP) were prepared in a single screw extruder at 240 °C. The two LCB-PPs were self-created via reactive extrusion at 180 °C by using dimyristyl peroxydicarbonate (PODIC C126) and dilauroyl peroxide (LP) as peroxides. For blending two virgin and three recycled PPs like coffee caps, yoghurt cups and buckets with different melt flow rate (MFR) values were used. The influence of using blends was assessed by investigating the rheological (dynamic and extensional rheology) and mechanical properties (tensile test and impact tensile test). The dynamic rheology indicated that the molecular weight as well as the molecular weight distribution could be increased or broadened. Also the melt strength behavior could be improved by using the two peroxide modified LCB-PP blends on the basis of PODIC C126 or PEROXAN LP (dilauroyl peroxide). In addition, the mechanical properties were consistently enhanced or at least kept constant compared to the original material. In particular, the impact tensile strength but also the elongation at break could be increased considerably. This study showed that the blending of LCB-PP can increase the investigated properties and represents a promising option, especially when using recycled PP, which demonstrates a real “up-cycling” process.

【 授权许可】

Unknown