Graphene oxide based coconut shell waste: synthesis by modified Hummers method and characterization

Heliyon

Zurnansyah¹  J. Agus²  M.Y. Dahlan³  Samnur³  B.D. Amin³  E.H. Sujiono³  D. Zabrian³ 

[1] Corresponding author.;Department of Mechanical Engineering, Universitas Negeri Makassar, Makassar, 90224, Indonesia;Laboratory of Materials Physics, Department of Physics, Universitas Negeri Makassar, Makassar, 90224, Indonesia;

关键词: Materials science;    Materials chemistry;    Organic chemistry;    Nanotechnology;    Coconut shell waste;    Graphene oxide;   

DOI  :  

来源: DOAJ

【 摘 要 】

Graphene oxide (GO) based on coconut shell waste was successfully synthesized using a modified Hummers method, and the obtained GO was confirmed using XRD, FTIR, Raman spectroscopy, UV-Vis spectroscopy, and SEM-EDX. The XRD spectroscopy obtained the fractional content of the 2H graphite phase of 71.53%, 14.47% phosphorus, 10.02% calcium, and 3.97% potassium in coconut shell charcoal, where the GO sample tend to forms a phase of reduced graphene oxide (rGO). FTIR spectra shows compound functional groups of hydroxyl (- OH) at peak 1 (3449.92 cm−1), carboxyl (-COOH) at peak 2 (1719.42 cm−1) and peak 3 (1702.62 cm−1), and alcohol (C–OH) at peak 4 (1628.12 cm−1) and epoxy (CO) at peak 5 (1158.51 cm−1), which is similar to the GO synthesis from pure graphite. Raman spectroscopy analysis shows that the value of the ID/IG intensity ratio of the GO sample was 0.89 with a 2D single layer, and SEM results showed that surface morphology with an abundance of granular particles were found with different size distribution. The UV-visible results showed sufficient optical properties characterized by the spectrum, which formed because of the light absorption of the energy passed on the sample. The bandgap energy value of the sample obtained by the Tauc plot method was 4.38 eV, which indicates semiconductor properties.

【 授权许可】

Unknown