Determination of Mechanical Properties of Fiber Reinforced Concrete for Numerical Modelling

Civil and Environmental Engineering

Cajka R.¹  Marcalikova Z.¹ 

[1] Department of Structures, Faculty of Civil Engineering, VSB-Technical University of Ostrava, Ludvíka Podéště 1875/17, 708 33Ostrava-Poruba, Czech Republic.;

关键词: fiber;    concrete;    mechanical properties;    numerical modelling;    flexural strength;   

DOI  :  10.2478/cee-2020-0010

来源: DOAJ

【 摘 要 】

The paper deals with the determination of mechanical properties of fiber reinforced concrete in dependence on various dosages and recipe of concrete. The mechanical properties were determined for the default recipe of concrete, where the individual variants differ in the amount of fibers. The fibers dosing was 0, 25, 50 and 75 kg/m3. At the highest dosage of 75 kg/m3, the recipe is optimized with regard to the microstructure of the concrete. In the experimental program were determined compressive strength, modulus of elasticity, split tensile strength, flexural tensile strength and load-displacement diagram. The flexural tensile strength was determined based on a three-point and four-point bending test. Based on the evaluated data, the uniaxial tensile strength and the functional dependence for the resultant recipe of concrete with a dosage of 75 kg/m3 is with respect of the increasing importance and application of numerical modelling of building structures, the analysis is performed using non-linear calculation. The aim was to simulate the performed laboratory test and appropriately approximate the specific input parameters of the fiber reinforced concrete for nonlinear analysis.

【 授权许可】

Unknown