Functional Composite Materials | |
Thermoelectric composite with enhanced figure of merit via interfacial doping | |
Michael J. Adams1  Joseph P. Heremans1  | |
[1] Department of Mechanical and Aerospace Engineering, The Ohio State University; | |
关键词: Effective medium; Locally doped; Microscopic inclusions; Thermoelectric; Figure of merit; | |
DOI : 10.1186/s42252-020-00004-y | |
来源: DOAJ |
【 摘 要 】
Abstract In order to improve the thermoelectric conversion efficiency and figure of merit, ZT, composite materials of organic or inorganic constituents often are considered. The limitation of this approach is set by the effective medium theory, which states that the ZT in a composite material cannot exceed the greatest value of any single constituent, if the constituents do not interact. Here, we describe a method that circumvents this limit, based on the introduction of interfacial doping. An electrically and thermally insulating medium is distributed into a conventional thermoelectric host material but is coated with an aliovalent acceptor that is allowed to diffuse locally into the host matrix, thereby doping it locally. The thermal conductivity decreases when the insulating material is added, but the more electrically conducting region around the insulator prevents an equally large increase in electrical resistivity. Employing this method in p-type (Bi1-xSbx)2Te3 compounds results in a maximum figure of merit zT = 1.3, an over 10% improvement compared to the host material alone. We report synthesis and measurement techniques in addition to thermoelectric transport properties. While we report on one material system, the concept is not specific to that system and may be used to provide functionality in other thermoelectric composites.
【 授权许可】
Unknown