Corrosion Study of Stainless Steels in Peracetic Acid Bleach Media With and Without Chloride and Chelant

International Journal of Research and Innovations in Science and Technology

卷:1

Rajendra Kumar¹  Ajay K Singh²  Rohtash³ 

[1] Gurukula Kangri Vishwavidyalaya;

[2] IIT Roorkee;

[3] MRK Institute of Engineering & Technology;

关键词: Bleach plant corrosion;    chelants;    electrochemical reactions;    peracetic acid;    stainless steel;    material selection;   

DOI  :  

来源: DOAJ

【 摘 要 】

The paper industries are adopting non-chlorine containing chemicals e.g. peroxide, ozone, peracids etc. as alternate ofchlorine based bleach chemicals e.g. chlorine and chlorine dioxide etc. with the aim of eco-friend atmospheres.Changeover to the new chemicals in the bleaching process is likely to affect the metallurgy of the existing bleach plantsdue to change in the corrosivity of the media. Accordingly, corrosion investigations were performed in a peracid namelyperacetic acid to test the suitability of austenitic stainless steels 654SMO, 265SMO, 2205, 317L and 316L. The performance of above stainless steels was evaluated through long term immersion tests and Electrochemical polarization measurements in peracetic acid (PAA) bleach media at pH value 4 maintaining concentration 0.2 % as active oxygen along with three chloride levels 0, 500 and 1000 ppm in pulp-free laboratory. To study the effect of corrosion inhibitors with extending limit of chloride in liquors, measurements were also made with two types ofchelants- EDTA & MgSO4. The results showed that corrosivity of PAA reduced by addition of chelant while increased with concentration of Cl¯. The results also exhibited that EDTA is better inhibitor than MgSO4.

【 授权许可】

Unknown