Enhanced extraction of butyric acid under high-pressure CO2 conditions to integrate chemical catalysis for value-added chemicals and biofuels

Biotechnology for Biofuels

卷:11

Okkyoung Choi¹  Byoung-In Sang¹  Jaesung Chun¹ 

[1]Department of Chemical Engineering, Hanyang University

关键词: Clostridium tyrobutyricum;    Butyric acid;    Extraction process;    Carbon dioxide;    High pressure;   

DOI  :  10.1186/s13068-018-1120-1

来源: DOAJ

【 摘 要 】

Abstract Background Extractive fermentation with the removal of carboxylic acid requires low pH conditions because acids are better partitioned into the solvent phase at low pH values. However, this requirement conflicts with the optimal near-neutral pH conditions for microbial growth. Results CO2 pressurization was used, instead of the addition of chemicals, to decrease pH for the extraction of butyric acid, a fermentation product of Clostridium tyrobutyricum, and butyl butyrate was selected as an extractant. CO2 pressurization (50 bar) improved the extraction efficiency of butyric acid from a solution at pH 6, yielding a distribution coefficient (D) 0.42. In situ removal of butyric acid during fermentation increased the production of butyric acid by up to 4.10 g/L h, an almost twofold increase over control without the use of an extraction process. Conclusion In situ extraction of butyric acid using temporal CO2 pressurization may be applied to an integrated downstream catalytic process for upgrading butyric acid to value-added chemicals in an organic solvent.

【 授权许可】

Unknown