Mean Value-Amplitude Method for the Determination of Anisotropic Mechanical Properties of Short Fiber Reinforced Thermoplastics

Journal of Composites Science

卷:6

Esha¹  Joachim Hausmann¹  Janna Krummenacker¹  Stefan Schmidt¹ 

[1] Leibniz-Institut für Verbundwerkstoffe (IVW), 67663 Kaiserslautern, Germany;

关键词: short-fiber composites;    injection molding;    X-ray computed tomography;    mechanical properties;   

DOI  :  10.3390/jcs6060179

来源: DOAJ

【 摘 要 】

Short fiber reinforced thermoplastics show distinct anisotropic behaviors due to their microstructure. The mechanical testing of specimens cut from injection molded plates at different angles to the injection molding direction reveals direction-dependent properties. However, these results are an average value for the tested cross section, which in more detail has a core-shell microstructure. When analyzing the stresses and deformation of a structural component, the local anisotropy will be very different compared to these tensile specimens. Therefore, a methodology is needed to transfer the properties obtained by mechanical testing to the local properties of an injection molded component. The core-shell microstructure and tests with different specimen thicknesses enable the determination of microstructure-dependent material properties. This paper presents a method using a mean value representing isotropy and an amplitude applied to the mean value to determine orientation-dependent mechanical properties. The amplitude in turn depends on the degree of anisotropy. The method is applied for extracting the anisotropic Young’s modulus of the core and shell layer of short glass fiber reinforced polyamide 46. The results obtained by this method and their reliability are discussed.

【 授权许可】

Unknown