Application of Mössbauer Spectroscopy for Identification of Iron-Containing Components in Upper Silesian Topsoil Being under Industrial Anthropopressure

Materials

卷:13

Marzena Rachwał¹  Patrycja Kierlik²  Aneta Hanc-Kuczkowska²  Izabela Matuła²  Ryszard Męczyński² 

[1] Institute of Environmental Engineering, Polish Academy of Sciences, 34 Sklodowska-Curie St., 41-819 Zabrze, Poland;

[2] Institute of Materials Engineering, University of Silesia, St. 75 Pułku Piechoty 1A, 41-500 Chorzów, Poland;

关键词: Mössbauer spectroscopy;    qualitative phase analysis;    magnetic susceptibility;    environmental pollution;    topsoil;    magnetic separation;   

DOI  :  10.3390/ma13225206

来源: DOAJ

【 摘 要 】

The main objective of the presented preliminary study was the identification of iron-containing phases. Iron-containing phases had accumulated in organic topsoil horizons collected from an area that has long been affected by the steel industry and emissions from power plants. X-ray diffraction and Mössbauer spectroscopy methods were used for the determination of the iron-containing mineral phases in topsoil subsamples which, after two-staged separation, varied in terms of magnetic susceptibility and granulometry. The Mössbauer spectra were recorded using paramagnetic and magnetic components, although the latter occurred only in the strongly magnetic fraction. The central part of spectra was fitted by two doublets (D1 and D2), which were identified as aluminosilicates. Simultaneously, the experimental spectra were described using several Zeeman sextets (Z1, Z2, and Z3) corresponding to the occurrence of hematite and magnetite-like phases with iron in tetrahedral and octahedral sites. Identification of magnetic phases in the tested material, including hematite, led to the conclusion that soil contamination in the studied area was presumably caused by emissions from a nearby power plant. Magnetite-like phases with a different iron content detected in topsoil samples could be related to metallurgical and coking processes, reflecting the specificity of the industrial area from which the samples were taken. The specific composition of the iron-containing aluminosilicates also illustrated the intense and long-lasting impact of the steel and coking industries on the studied area.

【 授权许可】

Unknown