Joining by forming – A selective review

Journal of Advanced Joining Processes

卷:3

J. Gebhard¹  F. Weber²  R. Gitschel³  S. Wernicke³  S. Goyal³  M. Kamaliev³  A. E. Tekkaya³ 

[1] Institute of Forming Technology and Lightweight Components, TU Dortmund University, Baroper Str. 303, D-44227 Dortmund, Germany;

[2] Corresponding author.;

关键词: Electromagnetic forming;    Hydroforming;    In-situ hybridization;    Chip extrusion;    Incremental sheet-bulk forming;    Draw-forging;   

DOI  :  

来源: DOAJ

【 摘 要 】

Current joining technologies have to fulfil multiple requirements. Firstly, the demand of mass reduction is causing a progressive hybridization, requiring the joining of dissimilar materials. Additionally, load-adapted structures lead to a variety of different workpiece geometries. Finally, the integration of functions, like the requirement of joints to be electroconductive or resistant to corrosion, are some of many requirements. Joining by forming processes can fulfil these diverse requirements. This paper aims to provide an overview into joining processes that are based on the principle of plastic deformation, contributed by the Institute of Forming Technology and Lightweight Components in Dortmund, Germany. For various classes of initial workpiece geometries, the process parameters influencing the joint strength, as well as the existing joining mechanisms, are presented by allocating experimental, numerical, and analytical research results.

【 授权许可】

Unknown