Effect of Surface Texture on Tensile Shear Strength of 1060Al-PET Welding Joints

Chinese Journal of Mechanical Engineering

Jia Liu¹  Tao Jiang¹  Yan Shi¹  Wenfu Cui¹  Yuchi Dai¹ 

[1] School of Electromechanical Engineering, Changchun University of Science and Technology, 130022, Changchun, China;Engineering Research Center of Laser Processing for Universities of Jilin Province, 130022, Changchun, China;National Base of International Science and Technology Cooperation in Optics, 130022, Changchun, China;

关键词: 1060Al-PET;    Surface texture;    Tensile shear strength;    Depth/width ratio;    Mechanical anchoring effect;   

DOI  :  10.1186/s10033-021-00645-5

来源: Springer

【 摘 要 】

Joining metal to plastic can lighten weight of products to reduce energy consumption. However, it is difficult to achieve high-strength welding between metal and plastic. To address this problem, the methods of surface texture pretreatment and laser irradiation welding was proposed to achieve the high-strength connection of metal and plastic. In this study, with different parameters of laser power and texture morphology, 1060 Al with surface texture treatment was joined to polyethylene terephthalate (PET) by laser irradiation welding from metal side. Study showed that as the laser power increased, the tensile shear strength of joints increased first, and decreased thereafter. Tensile shear tests demonstrated that the mechanical force of joint was strengthened contributed to mechanical anchorage formed by surface texture. The depth-width ratio of the texture grooves affected the tensile shear process of the joint. According to the result of temperature simulation, the existence of texture grooves reduced the heat transfer efficiency, and the heat dissipation at interface was also impeded in course of laser welding. Finally, the maximum tensile strength of 1060Al-PET joint reached 48.4 MPa, which was close to the strength of PET matrix. The bonding mechanism of the 1060Al-PET joints was composed of mechanical bonding and chemical bonding. This study proposes an effective method to join metal to plastic which achieved high-strength connection between metal and plastic.

【 授权许可】

CC BY