Tensile shear strength and cross tensile strength in welding using an ultrasonic complex vibration source

Acoustical science and technology

article

Haruki Sakuma¹  Takuya Asami¹  Hikaru Miura¹ 

[1] Department of Electrical Engineering, College of Science and Technology, Nihon University

关键词: Ultrasonic welding;    Planar vibration;    Complex vibration source;    Dissimilar metals;    Tensile shear strength;    Cross tensile strength;   

DOI  :  10.1250/ast.43.1

学科分类：声学和超声波

来源: Acoustical Society of Japan

【 摘 要 】

The authors have proposed a method of ultrasonic welding using planar vibration composed of longitudinal and torsional vibrations, and obtained higher tensile shear strength in a shorter time than by ultrasonic welding using conventional linear vibration. However, the cross tensile strength was not examined. And, the comparison of tensile shear strength and cross tensile strength in which the size, etc. of the weld samples was unified, and the tensile shear strength in changing the tensile direction and cross tensile strength in changing the peel direction for the vibration direction of the welding tip which applies ultrasonic vibration to weld samples have not been clarified. We performed ultrasonic welding using planar and linear vibrations with a change in weld time when the vibration direction of the tip of the welding tip applied to weld samples was changed. As a result, high tensile shear strength and cross tensile strength were obtained in a short time by ultrasonic welding using planar vibration. It was also clarified that there was almost no effect of the vibration direction of the welding tip on the tensile and peel directions.

【 授权许可】

Unknown