3D Printed frames to enable reuse and improve the fit of N95 and KN95 respirators

BMC Biomedical Engineering

Sara J. Li¹  Karen J. Lee¹  Christopher Van²  Leanne Smith²  David Krikorian³  Sherry H. Yu⁴  Malia McAvoy⁵  Michael P. Short⁶  Liwei Jiang⁷  Peter K. Sorger⁸  Brandon Beller⁹  Jacob Freake^1,10  Christopher Hansen^1,11  Zizi Yu^1,12  Ai-Tram N. Bui^1,12  Jordan T. Said^1,12  Nicole R. LeBoeuf^1,13  Arash Mostaghimi^1,14  Helen Yang^1,15  Avilash Cramer^1,16  Deborah Plana^1,17  Kimberley Huggins^1,18 

[1] Department of Dermatology, Brigham and Women’s Hospital, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Borobot, Middleborough, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Dana-Farber Cancer Institute, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Department of Dermatology, Yale University School of Medicine, New Haven, CT, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Department of Neurosurgery, University of Washington, Seattle, WA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Department of Nuclear Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Department of Radiology, Brigham and Women’s Hospital, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Department of Systems Biology, Harvard Ludwig Cancer Research Center, Harvard Medical School, Boston, MA, USA;Harvard Program in Therapeutic Science, Harvard Medical School, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Engineering Science at Norwalk Community College, Norwalk, CT, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Fikst Product Development, Woburn, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Harvard Graduate School of Design, Cambridge, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Harvard Medical School, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Harvard Medical School, Boston, MA, USA;Dana-Farber Cancer Institute, Boston, MA, USA;Department of Dermatology, Brigham and Women’s Hospital, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Harvard Medical School, Boston, MA, USA;Department of Dermatology, Brigham and Women’s Hospital, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Harvard-MIT Division of Health Sciences and Technology, Cambridge, MA, USA;Greater Boston Pandemic Fabrication Team (PanFab) c/o Harvard-MIT Center for Regulatory Science, Harvard Medical School, Boston, MA, USA;Harvard-MIT Division of Health Sciences and Technology, Cambridge, MA, USA;Department of Systems Biology, Harvard Ludwig Cancer Research Center, Harvard Medical School, Boston, MA, USA;Harvard Graduate School of Design, Cambridge, MA, USA;

关键词: COVID-19;    pandemic response;    personal protective equipment (PPE);    N95 respirators;    KN95 masks;    3D printing;    filtering face piece (FFP) respirator;    mask frames;    prototyping;    occupational health;   

DOI  :  10.1186/s42490-021-00055-7

来源: Springer

【 摘 要 】

BackgroundIn response to supply shortages caused by the COVID-19 pandemic, N95 filtering facepiece respirators (FFRs or “masks”), which are typically single-use devices in healthcare settings, are routinely being used for prolonged periods and in some cases decontaminated under “reuse” and “extended use” policies. However, the reusability of N95 masks is limited by degradation of fit. Possible substitutes, such as KN95 masks meeting Chinese standards, frequently fail fit testing even when new. The purpose of this study was to develop an inexpensive frame for damaged and poorly fitting masks using readily available materials and 3D printing.ResultsAn iterative design process yielded a mask frame consisting of two 3D printed side pieces, malleable wire links that users press against their face, and cut lengths of elastic material that go around the head to hold the frame and mask in place. Volunteers (n = 45; average BMI = 25.4), underwent qualitative fit testing with and without mask frames wearing one or more of four different brands of FFRs conforming to US N95 or Chinese KN95 standards. Masks passed qualitative fit testing in the absence of a frame at rates varying from 48 to 94 % (depending on mask model). For individuals who underwent testing using respirators with broken or defective straps, 80–100 % (average 85 %) passed fit testing with mask frames. Among individuals who failed fit testing with a KN95, ~ 50 % passed testing by using a frame.ConclusionsOur study suggests that mask frames can prolong the lifespan of N95 and KN95 masks by serving as a substitute for broken or defective bands without adversely affecting fit. Use of frames made it possible for ~ 73 % of the test population to achieve a good fit based on qualitative and quantitative testing criteria, approaching the 85–90 % success rate observed for intact N95 masks. Frames therefore represent a simple and inexpensive way of expanding access to PPE and extending their useful life. For clinicians and institutions interested in mask frames, designs and specifications are provided without restriction for use or modification. To ensure adequate performance in clinical settings, fit testing with user-specific masks and PanFab frames is required.

【 授权许可】

CC BY