Microfluidic Devices: Simple 3D Printed Scaffold‐Removal Method for the Fabrication of Intricate Microfluidic Devices (Adv. Sci. 9/2015)

Advanced Science

Vittorio Saggiomo¹ 

[1] Laboratory of BioNanoTechnology, Wageningen University, EK, Wageningen, The Netherlands

关键词: 3D printing;    microfluidics;    microfabrication;    devices;    NMR;   

DOI  :  10.1002/advs.201570033

来源: Wiley

【 摘 要 】

Abstract

ESCARGOT (Embedded SCAffold RemovinG Open Technology) is a novel and simple methodology for the manufacturing of complex microfluidic devices in a single block of polydimethylsiloxane, developed by V. Saggiomo and A. H. Velders in article number 1500125. Dissolvable scaffolds are used for the creation of microfluidic channels without the use of clean rooms, and integration of external elements directly in the microfluidic device is shown to be easy.

【 授权许可】

CC BY-NC   
© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Creative Commons Attribution-NonCommercial License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.