Formation of Mo−Si−Ti Alloys by Self−propagating Combustion Synthesis

Materials Research

Jie Wu¹  Gaoming Zhu¹  Peizhong Feng¹  Xianguo Zhou¹  Xiaohong Wang¹  Farid Akhtar¹ 

关键词: intermetallics;    silicide;    combustion synthesis;    self−propagating high−temperature synthesis;    X-ray diffraction;   

DOI  :  10.1590/1516-1439.011815

来源: SciELO

【 摘 要 】

Test specimens with nominal compositions MoSi2, (Mo0.9Ti0.1)Si2, (Mo0.8Ti0.2)Si2, (Mo0.7Ti0.3)Si2, (Mo0.6Ti0.4)Si2, (Mo0.5Ti0.5)Si2 and (Mo0.4Ti0.6)Si2 were prepared by combustion synthesis. The combustion mode, propagation velocity of combustion wave, combustion temperature and product structure were investigated. Specimens MoSi2, (Mo0.9Ti0.1)Si2, (Mo0.8Ti0.2)Si2, (Mo0.7Ti0.3)Si2, underwent spontaneously self−propagating combustion synthesis. However, the (Mo0.6Ti0.4)Si2 and (Mo0.5Ti0.5)Si2 specimens required a sustainable energy supply to complete the combustion synthesis reaction. There was no combustion synthesis reaction in specimen (Mo0.4Ti0.6)Si2. The combustion wave propagated along a spiral trajectory from top to the bottom of the specimen compacts in a layer by layer mode. The propagation velocity of the combustion wave reduced with the addition of titanium. The X-ray diffraction analysis showed that the Cllb-MoSi2 and C40-(Mo,Ti)Si2type phases were formed during combustion synthesis. The intensity of diffraction peaks of C40-(Mo,Ti)Si2 phase increased with Ti content.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License