Influence of welding parameters and post-weld aging on tensile properties and fracture location of AA2139-T351 friction-stir-welded joints

Materials Research

Umberto Prisco¹  Antonino Squillace¹  Antonello Astarita¹  Carla Velotti¹ 

[1] ,University of Napoli Federico II Department of Materials and Production Engineering Napoli,Italy

关键词: welding parameters;    AA2139-T351;    friction stir welding;    post-weld ageing;    tensile properties;    fracture location;   

DOI  :  10.1590/S1516-14392013005000099

来源: SciELO

【 摘 要 】

Tensile properties and fracture location of AA2139-T351 friction stir welded joints are studied in the as-welded and post-weld aged condition. The experimental results show that when the joints are free of welding defects, they fail on the advancing side of the HAZ exhibiting a large amount of plastic deformation. When the revolutionary pitch exceeds a threshold value, some micro-defects are formed in the weld nugget due to insufficient heat input. In this case, the joints fail near the weld center, and the fracture occurs in a mixed mode, both ductile and brittle. However, being less ductile, post-weld aged joints are less defect-tolerant and, then, they fracture closer to the weld center, showing a reduced elongation at fracture and an UTS within the order of magnitude of the as-welded joints.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License