Determination of optimum welding parameters in connecting high alloyed X53CrMnNiN219 and X45CrSi93 steels by friction welding

Bulletin of materials science

Mustafa AkdaÄŸ¹  Bekir Sadik Ãœnlü²  Mehmet Uzkut² 

[1] Department of Mechanical Engineering, Faculty of Engineering, Celal Bayar Ãœniversity, 45140, Muradiye, Manisa, Turkey$$Department of Mechanical Engineering, Faculty of Engineering, Celal Bayar Ãœniversity, 45140, Muradiye, Manisa, TurkeyDepartment of Mechanical Engineering, Faculty of Engineering, Celal Bayar Ãœniversity, 45140, Muradiye, Manisa, Turkey$$;Department of Machinery, Vocational High School, Celal Bayar University, 45400, Turgutlu, Manisa, Turkey$$Department of Machinery, Vocational High School, Celal Bayar University, 45400, Turgutlu, Manisa, TurkeyDepartment of Machinery, Vocational High School, Celal Bayar University, 45400, Turgutlu, Manisa, Turkey$$

关键词: Friction welding;    welding parameters;    microstructure.;   

DOI  :  

学科分类：材料工程

来源: Indian Academy of Sciences

【 摘 要 】

In this study, different welding parameters were applied to two different steels with high alloys and mechanical and metallographical investigations are performed. Thus, the optimum welding parameters were determined for these materials and working conditions. 12.30 diameter steel bars made up of 1.4871 (X53CrMnNiN219) and 1.4718 (X45CrSi93) steel were used as experimental material. The material loss increased with increase in friction and rotating pressure. No fracture at the welding region was observed and the highest fracture energy was identified in B5 group. Based on micro hardness investigation; the hardness profile reached its minimum value at the welding region.

【 授权许可】

Unknown