Kinetics and equilibrium studies of Pb2+ in removal from aqueous solutions by use of nano-silversol-coated activated carbon

Brazilian Journal of Chemical Engineering

P. Senthil Kumar¹  C. Vincent¹  K. Kirthika¹  K. Sathish Kumar¹ 

[1] ,SSN College of Engineering Department of Chemical Engineering ,India

关键词: Lead (Pb2+);    Adsorbent;    Adsorption isotherms;    Batch adsorption;    Removal;   

DOI  :  10.1590/S0104-66322010000200012

来源: SciELO

【 摘 要 】

The ability of nano-silversol-coated activated carbon (NSSCAC) to adsorb Pb2+ from aqueous solution has been investigated through batch experiments. The adsorption of lead onto NSSCAC has been found to depend on adsorbent dose, initial concentration and contact time. The experiments were carried out at natural solution pH. Equilibrium data fitted well with the Langmuir model and Freundlich model with a maximum adsorption capacity of 23.81 mg of Pb/g of NSSCAC. The experiments showed that the highest removal rate was 92.42% for Pb2+ under optimal conditions. The sorption of Pb2+ on NSSCAC was rapid during the first 30 min and the equilibrium attained within 60 min. The kinetic processes of Pb2+ adsorption on NSSCAC were described by applying pseudo-first-order and pseudo-second-order kinetic models. The kinetic data for the adsorption process obeyed a pseudo-second-order kinetic model, suggesting that the adsorption process is chemisorption. The NSSCAC investigated in this study showed good potential for the removal of Pb2+ from aqueous solution.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License