Development of a fluidized bed system for adsorption of phenol from aqueous solutions with commercial macroporous resins

Brazilian Journal of Chemical Engineering

R. A. Corrêa²  L. A. Calçada¹  R. P. Peçanha¹ 

[1] ,MCT CNEN Instituto de Engenharia NuclearRio de Janeiro RJ ,Brasil

关键词: Phenol adsorption;    Fluidized beds;    Macroporous resins;   

DOI  :  10.1590/S0104-66322007000100002

来源: SciELO

【 摘 要 】

This work is related to removal of phenol from wastewaters by adsorption onto polymeric resins, a current alternative to activated carbon. A closed circuit, bench-scale liquid fluidized bed system was developed for this purpose. Phenol aqueous solutions with initial concentrations in the range of 0.084 to 0.451 kg/m³ were used to fluidize small permeable capsules of stainless steel screen containing a commercial resin at 308 K. Experiments were carried out using a fluidizing velocity 20% above that of the minimum fluidization of the capsules. Typically, 30 passages of the liquid volume circulating through the bed were required to reach a quasi-equilibrium concentration of phenol in the treated effluent. A simple batch adsorption model using the Freundlich isotherm successfully predicted final phenol concentrations. Suspended solids, often present in residual waters and a common cause of fixed bed clogging, were simulated with wood sawdust.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License