Effect of solvent on the preparation and characterization of DSA®-type anodes containing RuO2-TiO2-SnO2

Journal of the Brazilian Chemical Society

Roberta D. Coteiro¹  Fernando S. Teruel¹  Josimar Ribeiro¹  Adalgisa R. De Andrade¹ 

[1] ,Universidade de São Paulo Faculdade de Filosofia, Ciências e Letras de Ribeirão Preto Departamento de QuímicaRibeirão Preto SP ,Brazil

关键词: ruthenium oxide;    tin oxide;    DSA®;    isopropanol;    service life;   

DOI  :  10.1590/S0103-50532006000400020

来源: SciELO

【 摘 要 】

Anodes containing ruthenium, titanium, and tin oxides supported on metallic Ti were prepared by thermal decomposition of precursor salts in order to investigate the effect that changing the solvent (from HCl/H2O to isopropanol) would have on the real composition of the mixed oxide electrodes. The precursor solutions and their mixtures were analyzed by UV-Vis Spectrophotometry. Coatings morphology and composition were analyzed by Scanning Electronic Microscopy (SEM) and Energy Dispersive X-ray (EDX). Determination of the electrochemically active area and electrode stability was performed by voltammetric characterization (1.0 mol L-1 HClO4) and service life (SL) tests, respectively. Electrodes prepared from isopropanol showed excellent agreement between the nominal and experimental composition and they presented higher electrochemically active area and better stability when compared to those prepared in the presence of HCl. Preparation of the precursor mixture in isopropanol increases RuO2-TiO2-SnO2 electrodes service life.

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License