Development and validation of a capillary electrophoresis method for the determination of sulfate in indinavir sulfate raw material

Journal of the Brazilian Chemical Society

Elisabete A. Pereira¹  Gustavo A. Micke¹  Marina F. M. Tavares¹ 

关键词: indinavir sulfate;    capillary electrophoresis;    sulfate;    validation;    HIV;   

DOI  :  10.1590/S0103-50532006000200006

来源: SciELO

【 摘 要 】

In this work, a simple and fast capillary electrophoresis method using indirect UV detection (230 nm) for the quantitative determination of sulfate in the indinavir sulfate raw material was described. A running electrolyte consisting of 10 mmol L-1 ammonium molybdate containing 0.15 mmol L-1 cetyltrimethylammonium bromide (pH 7.5) was used. Samples were injected hydrodynamically by applying 5000 Pa pressure during 3 s. The response was linear from 10.1 µg mL-1 to 79.8 mg µL-1. Limits of detection and quantification were 0.34 and 1.13 mg µL-1, respectively. The intra-day precision expressed as relative standard deviation was 2.8% for 10 independent sample preparations. Recoveries varying from 96.9 to 102.4% at three concentration levels were obtained. The methodology was successfully applied for real samples. The concentration of sulfate in indinavir sulfate raw material varied from 13.3 to 13.5% (m/m calculated as anhydrous base).

【 授权许可】

CC BY   
 All the contents of this journal, except where otherwise noted, is licensed under a Creative Commons Attribution License